三维动态裂纹问题的超奇异积分方程法

基于弹性材料的动态基本方程，结合广义Betti-Rayleigh互易等式与时域下的边界积分方程，推导得到时域下的超奇异积分方程组。引入Laplace域下的动态基本解，将经过主部分析的积分核函数分解为静态和动态部分，其中动态积分核不具有奇异性。在裂纹前沿附近单元，采用与理论分析一致的平方根位移模型。结合Lubich时间卷积实现拉氏变换，采用配置点法计算超奇异积分，获得问题的数值解。并针对椭圆裂纹算例编写Fortran程序，得到冲击荷载作用下张开型裂纹的动态应力强度因子变化规律，数值结果稳定且收敛速度快。     

Non‐Pyrolytic,Large‐Scale Synthesis of Trichalcogenasumanene: A Two‐Step Approach

Trichalcogenasumanenes were synthesized on a multigram scale through a two‐step approach that takes advantage of non‐pyrolytic cyclization and solventless ring contraction. Solid‐state structure and photophysical investigations demonstrate that these compounds are promising candidates for electronic materials.     

Differentiating parts of Cinnamomum cassia using LC‐qTOF‐MS in conjunction with principal component analysis

Cinnamon bark (Rou Gui in Chinese), cinnamon twig (Gui Zhi) and shaved cinnamon bark (Gui Sin) have been widely used as spices and in traditional Chinese medicine since ancient times. On‐going issues related to quality and authenticity necessitate the development of analytical methods capable of providing an objective evaluation of samples. In this study, chemical fingerprints of cinnamon bark, cinnamon twigs and shaved cinnamon bark were established using liquid chromatography quadruple time‐of‐flight mass spectrometry in conjunction with principal component analysis (PCA). From 125 samples of cinnamon, we identified the following eight compounds and their the detection ratios: coumarin, cinnamaldehyde, cinnamyl alcohol, cinnamic acid, 2‐hydroxycinnamaldehyde, 2‐hydroxycinnamic acid, 2‐methoxycinnamaldehyde and 4‐methoxycinnamaldehyde. Of these, 4‐methoxycinnamaldehyde presented the largest variations in detection ratio, making up 64.0, 97.4 and 50.0% in cinnamon bark, cinnamon twig, and shaved cinnamon bark, respectively. The quantities of cinnamyl alcohol, coumarin and cinnamaldehyde also varied between the three parts of the plant. Chemical fingerprints of the three cinnamon samples were established using principal component analysis, the results of which indicate that cinnamon bark and shaved cinnamon bark could be easily differentiated, despite a marked similarity in outward appearance. Cinnamon twig was also shown to depart from the other clusters. The proposed method provides a fast and efficient means of identifying cinnamon herbs for quality control purposes. Copyright © 2016 John Wiley & Sons, Ltd.     

电镀铜实验中镀层性质及其影响因素的探究*

电镀实验是电解原理应用的重要案例,通过实验不仅要获得定性的感性认知,还应该获得定量的理性数据。针对电镀铜实验,通过改变铜离子浓度、pH、电解时间、电解电压和电解温度等因素,探究其对镀层厚度、均匀性和致密性等性质的影响,在电解原理的基础上分析其形成机制,从而确定了电镀铜较适宜的操作条件,以此为学生开展电镀实验提供参考案例与研究思路。     

Quantum Thermalization and Vanishing Thermal Entanglement in the Open Jaynes–Cummings Model

The quantum thermalization of the Jaynes–Cummings (JC) model in both equilibrium and non-equilibrium open-system cases is studied, in which the two subsystems, a two-level system and a single-mode bosonic field, are in contact with either two individual heat baths or a common heat bath. It is found that in the individual heat-bath case, the JC model can only be thermalized when either the two heat baths have the same temperature or the coupling of the JC system to one of the two baths is turned off. In the common heat-bath case, the JC system can be thermalized irrespective of the bath temperature and the system–bath coupling strengths. The thermal entanglement in this system is also studied. A counterintuitive phenomenon of vanishing thermal entanglement in the JC system is found and proved.     

化学蒸气发生-电感耦合等离子体原子发射光谱法测定地质样品中痕量金

地质样品经盐酸-硝酸(3+1)混合酸溶解,活性炭分离富集后,于90℃用12g.L-1硼氢化钠溶液(溶于0.5g.L-1氢氧化钠溶液中)作还原剂,用化学蒸气发生-电感耦合等离子体原子发射光谱法测定其中痕量的金。金的质量浓度在1 500μg.L-1以内与其发射强度呈线性关系,方法的检出限(3s)为0.59μg.L-1。方法用于测定2个标准物质(GBW 07289和GBW 07291)中金含量,测定值与认定值相符。     

Copolyphenylenes with pendant benzimidazolyl and diethanolaminohexyloxy groups: Synthesis and electron‐transporting application in PLEDs

Two new electron‐transporting copolyphenylenes P1NH and P2NH possessing balanced charges crucial to emission efficiency of polymer light‐emitting diodes (PLEDs) have been synthesized and applied as an electron‐transporting layer (ETL). The main chain structure is all para‐linkage for P1NH and both para‐ and meta‐linkage for P2NH , with the same pendant electron‐withdrawing benzimidazolyl and polar diethanolaminohexyloxy groups. Both copolymers possess excellent thermal stability (T _d > 300 °C, T _g > 100 °C) due to their rigid backbones. In addition, the pendant groups effectively lower LUMO (～ ?2.70 eV) and HOMO (～ ?5.70 eV) levels, resulting in improved electron‐transporting and hole‐blocking capabilities. Multilayer yellow‐emitting PLEDs with a configuration of ITO/PEDOT:PSS/SY/ETL/LiF/Al were successfully fabricated by the spin‐coating process. The maximum luminance and maximum current efficiency of the P1NH ‐based device were 12,881 cd/m² and 10.94 cd/A, respectively, superior to the performance of P2NH ‐based device (4938 cd/m², 3.70 cd/A) and the device without ETL (8690 cd/m², 2.78 cd/A). Current results indicate that P1NH is highly effective in enhancing electron transport and device performance. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2494–2505     

Effects of the laser surface treatment on the mechanical properties of CuZr-based bulk metallic glasses

Surfaces of three types of CuZr-based bulk metallic glasses (BMGs) were modified by laser surface treatment (LST), and the influence of the treatment on structure and mechanical properties of these alloys was investigated. The phase structure of as-cast and laser-treated samples was characterized by XRD and the morphology of the alloys after fracture was examined by SEM. The compressive plasticity of treated Cu47.5Zr47.5Al5 and Cu46.5Zr47.5Al5Co1 BMGs can be improved from 0.5% to 2.0% and from 1.2% to 5.7% respectively compared with the as-cast ones, while (Cu0.55Zr0.40Al0.05)99Er1 BMG shows insignificant change of plasticity. The improvement in plasticity is attributed to induced crystallization of B2 CuZr phase in the treated surface zone of selected metallic glasses.